Fiber optic

• MM 62,5/125 or 50/125  850 and 1300 nm
• SM 1310 and 1550nm

 Fiber optic

• MM 62,5/125 or 50/125  850 and 1300 nm
• SM 1310 and 1550nm

• Platform FTB-200  with 2 bays
• FTB-7200D-12CD-23B
• 850/1300  1310/1550 nm 27/26 37/34 dB

Fast and Precise  Fault Location

With its advanced and proprietary software, the LM OTDR module enables any operator, with one key press, to pinpoint any network fault in a fraction of seconds. Its 4 cm resolution and up to 128,000 acquisition points enables the unit to provide the most accurate distance on the market.

– Fast detection

– Precise fault location

– One button automation

– No specific settings required

– Distance, loss and ORL measurement

Ideal for Construction and Maintenance

During the construction or repair of an FTTx network, the VSRe OTDR module provides all relevant information required for fiber qualification. The trace and table are displayed simultaneously, with direct access to cursors and zoom. It also features:

– Fully automatic or manual modes

– Templates for multi fiber acquisitions

– Automatic, semi-automatic or manual measurements

– Multitrace display for trace comparison

– Auto filenaming and auto storage with comprehensive cable and fiber Identification.

Fast and Precise  Fault Location

With its advanced and proprietary software, the LM OTDR module enables any operator, with one key press, to pinpoint any network fault in a fraction of seconds. Its 4 cm resolution and up to 128,000 acquisition points enables the unit to provide the most accurate distance on the market.

– Fast detection

– Precise fault location

– One button automation

– No specific settings required

– Distance, loss and ORL measurement

Ideal for Construction and Maintenance

During the construction or repair of an FTTx network, the VSRe OTDR module provides all relevant information required for fiber qualification. The trace and table are displayed simultaneously, with direct access to cursors and zoom. It also features:

– Fully automatic or manual modes

– Templates for multi fiber acquisitions

– Automatic, semi-automatic or manual measurements

– Multitrace display for trace comparison

– Auto filenaming and auto storage with comprehensive cable and fiber Identification.

The ACCESS Master MT9083A2 features a 7-inch widescreen TFT-LCD display for use both indoors and outdoors, enhanced battery operation time (up to 12 hours) increased operating temperature range (-10° to 50°C) and short-cut function keys. Baseline Features: Ready to test in less than 15 seconds…and all day without recharging Specialized testing modes simplify operation High resolution and high dynamic range ensure thorough and complete fiber evaluation Intelligent analysis software identifies problem splices, connectors and even macrobends Rugged, sealed design provides years of service in the most challenging environments Test up to four wavelengths with a single unit – single mode, multimode or both ITU-T recommended 1650nm for in-service troubleshooting Verify connector quality with optional connector inspection microscope SCPI remote command support Feature offering easy graphical summary & PDF reporting Password protection feature for important file on-internal memory Enhancements: Larger (7-inch), higher resolution (800 × 400) display with LED backlight Longer battery operation time: Up to 12 hours Wider operating temperature range: -10°C to 50°C Lighter — only 2.6 kg (5.7 lbs) New Fiber Visualizer feature offering easy graphical summary & PDF reporting Password protection feature to prevent unit theft Automated connector PASS/FAIL based on IEC 61300-3-35

 Fiber optic

• MM 62,5/125 or 50/125  850 and 1300 nm
• SM 1310 and 1550nm

ALL-IN-ONE Ethernet/optical solution for field technicians installing, testing and troubleshooting FTTx, fronthaul, backhaul, small-cell, DAS, remote radio head and data center networks, in addition to OTN, SONET/SDH, Fibre Channel, GigE and 10 GigE, CPRI/OBSAI and SyncE/1588 PTP services, with the added support of OTDR and iOLM capabilities.

THE ULTRA-PORTABLE CHOICE FOR MULTISERVICE TESTING

The ongoing transition towards a converged network infrastructure for optical, SONET/SDH, OTN, Fibre Channel and packet-based Ethernet services requires a test tool that can cover a wide range of interfaces and rates without sacrificing portability, speed or cost. Leveraging the powerful FTB-1 handheld platform, the FTB- 700G Series streamlines processes and empowers field technicians to efficiently test and validate optical, SONET/SDH, OTN, Fibre Channel and Ethernet circuits.

OPTICAL

REMOVING THE COMPLEXITY FROM THE OTDR

Using a unique and patented automated multipulse and multi-wavelength acquisition approach, the field-proven iOLM surpasses the traditional OTDR and linear view for expert-level link characterization of any fiber network.

This dynamic OTDR-based application uses EXFO’s most advanced algorithms to deliver detailed information and maximum resolution on every element of the link. Thanks to its unmatched intelligence and simplicity, the iOLM converts complex OTDR tests into clear and accurate go/no-go results, through a single button operation.

MULTISERVICE

POWERFUL AND FAST

The FTB-700G Series is a fully integrated optical, SONET/SDH, OTN, Fiber Channel and Ethernet handheld tester. It offers the industry’s largest touchscreen and unprecedented configuration simplicity via a hybrid touchscreen/keypad navigation interface. Platform connectivity is abundant via 3G, WiFi, Bluetooth, Gigabit Ethernet or USB ports, making it accessible in any environment.

Setting a New GUI Standard: Unprecedented Simplicity in Configuration Setup and Navigation

The FTB-700G Series intelligent situational-configuration setup feature guides technicians through complete, accurate testing processes (suggestion prompts, help guides, etc.). It reduces navigation by combining associated testing functions on a single screen, and offers intelligent autodiscovery that allows a single technician to perform end-to-end testing.

Key Features

1.    Auto-test Time and Frequency range

• Auto-test Time 9 sec ( CAT-6)
• Supported frequency range:1MHz---900MHz
• Supported 1000BASE-T Ethernet

2.    Cable Types

• Shielded or unshielded
• TIA/EIA-568-B: CAT3,CAT5e and CAT6, CAT6A and CAT-7 TERA and Nexans
• ISO/IEC 11801: Class C,D and E
• Telephone
• COA

3.    Fiber optic

• MM 62,5/125 or 50/125  850 and 1300 nm
• SM 1310 and 1550nm

• Launch fiber MM 50/125 200 m, OM2
• Conectors SC/PC y FC/PC