LOW COST All IN ONE AMOLED DISPLAY

☆ Digital TV Analyzer : DVB-C/C2/T/T2/S/S2, (QPSK, 8PSK, QAM, COFDM)

☆ Video decoder: MPEG1/2/4/H.264, H265,VC1,DV,  SD/HD to 1080p

☆ Handheld TS Analyzer

☆ Spectrum Analyzer.

AD454 is an optical fiber splicing device with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. The built-in large capacity Li-Ion battery can support long-time field work. The real-time compensation system for temperature, and air pressure has greatly enhanced the device against unfavorable environment changes.

Main Features:
    ο New fully-digitalized design;
    ο Small in size, lightweight: only 1,5 kg with battery;
    ο Takes only 10 seconds for splicing, 36 seconds for pyrocondensation;
    ο Can set automatic start of splicing or of pyrocondensation upon close of the cover;
    ο Simultaneous display of X/Y axis; zoom in up to 320 times original size;
    ο Real time discharging for adjustment; no need for further adjustment;
    ο Electrode has a long life; discharging times up to 5000;
    ο With USB port;
    ο 4,3 inch digital high resolution LCD;
    ο Precise real-time display of remaining battery capacity;
    ο Built-in high capacity battery, which enables up to 250 times of splicing and heating.

Information about Product

Designed for Ethernet systems, AD500 measures the speed and performance on CAT3, CAT5e and CAT6 cables according to ANSI/TIA/EIA-568-B and ISO/IEC 11801 to ensure the cable qualification

＊Compatible with DVB-T/T2 and DVB-C standard
＊DVB-T/T2: Comply with ETS300744 standard/ Support Power, MER, CBER and VBER
＊DVB-C: Support Digital and Analog TV Measurements
＊Spectrum Function (5~1000MHz)
＊Easy to use

Informatión about Product

  • High Bandwidth 200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
  • 1M Memory Depth.
  • High Refresh Rate (2500 frames)
  • Large 5.6 inch TFT Color LCD Display，High Resolution(640*480), Dual-Window Design --More clear, More Detailed
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
  • Easy-to-use pop-up menu with built-in multi-language help system
  • 23 Automatic Measurements
  • Waveform Math: Add, Subtract, Multiply, and Divide
  • Store and recall over
  • Automatic cursor tracking measurements
  • XY Mode
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
  • Pass-Fail function compares a stored waveform to an unknown input
  • Average Mode for smoothing waveforms
  • Square Wave Output (2V, 1kHz) for probe adjustment
  • USB Host/Device 2.0 full-speed interface ,support removeable disk ,Easy to control by PC or long-distance.

Información sobre el Producto

Información sobre AD Instruments

Sets REBT-1  CAT. Specialist: formed by:

• AD6830: Analyzer of networks and harmonic, it includes 1000A clamps, connection USB and software for PC.
•  AD4120: Ground Meter
•  AD9985: Isolate Meter analogical / digital 1000V/10 Gohm.
•  AD2811: Digital loop impedance meter
•  AD4112: Digital RCD meter.
•  AD1010: Luxómeter
•  LVD-17: Tension detector with ajsute of sensibility.
•  AD3348: Clamp wattmeter AC/DC TRUE RMS
• AD9809: High resolution 1 uA AC leakage clamp meter

Informatión about AD Instruments

ADPON-T is a portable, high quality PON optical power meter. It is specifically designed to meet the rapid growth of FTTx market with PON (Passive Optical Network) technologies. It is capable to measure all three signals (1310nm, 1490nm and 1550nm) that carry voice, data and video, so-called triple-play applications along a single fiber. ADPON can measure not only 1490nm and 1550nm optical signal, but also accurately detect and measure the upstream burst at 1310nm sent from an ONU while the ONU is in the idle mode. The simple operation and accurate measurement make ADPON-T becomes an ideal tool for PON (suitable for APON, BPON, EPON and GPON application) installation/acceptance test to ensure that they meet required standards, and service activation and troubleshooting.

Information about Product

Information about AD Instruments

DTVLINK-C is designed for HFC network installation, maintenance and troubleshooting. This QAM analyzer could meet all types of measurement of QAM & Analog TV Signal Index and  Cable Modem DOCSIS/ EuroDOCSIS 3.0

Download Datasheet

• From 9 KHz a 7,1 GHz.
• Option 09 : 10 MHz BW Demodulation Hardware
• Option 19: High Accuracy Power Meter Support (Sensor included)
• Option 31: GPS Receiver (Includes GPS Antenna Part Number 2000-1410)
• Option 64: DVB-T/H Digital Video Measurement.
• Option 57:  DVB-T/H BER Measurement.
• Option 78: DVB-T/H SFN Measurement.
• 760-243-R: Large Transit Case with Wheels and Handle

Information about Product

Equipment Set for installers type F formed for:

• ADPON-T:   Analyzer of networks FTTx, screen color, datalogger, connection USB connectors SC/APC, ST/APC, and FC/APC included.
• AD2T01:  Source triple laser 1310/1490/1550 nm in one the only exit,ajustable output power from -2 dBm to -8dBm, SC/APC, ST/APC and FC/APC included.
• AD503D:  Kit of cleanliness and conectorización (it includes precision cutting machine and number of series).

   

• Power Quality Analysis for Single and Balanced Three Phase System
• Harmonic Analysis of Voltage and Current (1 to 50th order)
• True RMS measurement of V with 0.5% basic accuracy
• True RMS measurement of A with 1% of range basic accuracy
• Graphic Waveform of Voltage and Current
• Graphic Phasor Diagram
• Transient Detection and Logging of Swell, Dip, and Outage
• Fast peak function (39?s for 50 Hz, 33?s for 60Hz)
• Active (W, KW, HP), reactive (VAR, KVAR) and apparent (VA, KVA) power
• Power factor (PF), phase angle (?), and energy (WH, KWH)
• Measurement of balanced 3? Power Quality
• Programmable VT ratio from 1 to 3000
• Hold functions
• Auto power off function in 15 minutes

July 2012: Discontinued.

DTVLINK  is a professional digital satellite and terrestrial broadcast installation equipment for accurate detection, alignment and configuration of digital TV signal reception

Designed for field measurement, all product ranges are portable and compact with a 3.5 Inch High Definition TFT LCD Screen for signal analysis and channel display

The instrument is rechargeable using the Li-oN battery pack, 12.6V, 2,200 mA

ensuring a standard operation for 4 hours.

Equipment Set for installers type F formed for:

• ADPON-T:   Analyzer of networks FTTx, screen color, datalogger, connection USB connectors SC/APC, ST/APC, and FC/APC included.
• AD2T01:  Source triple laser 1310/1490/1550 nm in one the only exit, output power ajustable from -2 dBm to -8 dB, SC/APC, ST/APC and FC/APC included.

DISCONTINUED, CHECK THE ADPON-T

 ADPON is a portable, high quality PON optical power meter. It is specifically designed to meet the rapid growth of FTTx market with PON (Passive Optical Network) technologies. It is capable to measure all three signals (1310nm, 1490nm and 1550nm) that carry voice, data and video, so-called triple-play applications along a single fiber. ADPON can measure not only 1490nm and 1550nm optical signal, but also accurately detect and measure the upstream burst at 1310nm sent from an ONU while the ONU is in the idle mode. The simple operation and accurate measurement make ADPON becomes an ideal tool for PON (suitable for APON, BPON, EPON and GPON application) installation/acceptance test to ensure that they meet required standards, and service activation and troubleshooting.

Information about Product

Information about AD Instruments

DISCONTINUED, CHANGED TO DTVLINK-T2

Informatión about AD Instruments

High quality 4 channel DSO with 70 MHz bandwidth + 2 channel waveform generator with 25 MHz bandwidth, 1 GSa/s and 12 Mpts memory depth. Delivery including 4 probes (bandwidth 150 MHz), USB cable, power adapter and manual on CD.

Dowload   DATASHEET   USER MANUAL

High quality 4 channel DSO with 70 MHz bandwidth , 1 GSa/s and 12 Mpts memory depth. Delivery including 4 probes (bandwidth 150 MHz), USB cable, power adapter and manual on CD.

High quality 4 channel DSO with 100 MHz bandwidth, 1 GSa/s and 12 Mpts memory depth. Delivery including 4 probes (bandwidth 150 MHz), USB cable, power adapter and manual on CD.

All IN ONE

☆ Digital TV Analyzer : DVB-C/T/H/S/S2, ATSC, ISDB-T/Tb, IPTV

☆ Video decoder: MPEG2/4/H.264, SD/HD

☆ Handheld TS Analyzer

☆ Spectrum Analyzer

☆ Optional external GPS USB

Catalogue

＊Compatible with DVB-T/T2, DVB-S/S2,  DVB-C standard
＊DVB-T/T2: Comply with ETS300744 standard/ Support Power, MER, CBER and VBER
＊DVB-C: Support Digital and Analog TV Measurements
＊Spectrum Function (5~1000MHz)
＊Easy to use

Informatión about Product

• From 2 MHz to 4 GHz
• Option 21 2-Port Transmission Measurement
•  Option 25 Interference Analyzer  
•  Option 27 Channel Scanner
•  Option 28 C/W Signal Generator
•  Option 31 GPS Receiver
•  Option 44 W-CDMA/HSPA+ RF Measurements
•  Option 52 E1 Analyzer
•  Option 62 EV-DO RF Measurements
•  Option 63 EV-DO Demodulation
•  Option 65 W-CDMA/HSPA+ Demodulation
•  Option 66 Mobile WiMAX RF Measurements
•  Option 67 Mobile WiMAX Demodulation
•  Option 90 Gated Sweep

Catalogo del Producto

Included

•  22N50 : Open/Short
•  SM/PL: Precision Load
•  Option: ICN50: InstaCal Calibration Module, 2 MHz to 6.0 GHz, N(m), 50 Ω

Product

DTVLINK-C is designed for HFC network installation, maintenance and troubleshooting. This QAM analyzer could meet all types of measurement of QAM & Analog TV Signal from 5 to 1200 MHz.
Download Datasheet

• Cable and antenna analyzer from 25 MHz to 4000 MHz
• Spectrum analyzer from 100 KHz to 3000 MHz.
• Option 05
• Sensor 5400-71N50 optional.
   

Product

• Built-in spectrum analyzer (100 kHz to 7.1 GHz)
• Built-in cable and antenna analyzer (10 MHz to 4 GHz)
• Built-in power meter (10 MHz to 7.1 GHz)
• Transmitter analyzer (WCDMA/HSDPA, GSM/GPRS/EDGE, WiMAX, CDMA, EVDO, TD-SCDMA, LTE)
• Interference analyzer (100 kHz to 7.1 GHz)
• Channel scanner (100 kHz to 7.1 GHz)
• GPS Receiver
• Options included: 10, 25, 27, 31, 33, 34, 42, 43, 62, 63, 541, 542 y 546

Catalogo del Producto

High quality 4 channel DSO with 50 MHz bandwidth , 1 GSa/s and 12 Mpts memory depth. Delivery including 4 probes (bandwidth 150 MHz), USB cable, power adapter and manual on CD.

•  Cable and antenna analyzer from 25 MHz to 4 GHz
•  Two ports
•  Option: Power meter

Product

• From 2 MHz to 4 GHz
• Option 21 2-Port Transmission Measurement
•  Option 25 Interference Analyzer  
•  Option 27 Channel Scanner
•  Option 28 C/W Signal Generator
•  Option 31 GPS Receiver
•  Option 44 W-CDMA/HSPA+ RF Measurements
•  Option 52 E1 Analyzer
•  Option 65 W-CDMA/HSPA+ Demodulation
•  Option 66 Mobile WiMAX RF Measurements
•  Option 67 Mobile WiMAX Demodulation
•  Option 90 Gated Sweep
•  Option 541 LTE RF measures
•  Option 542 LTE modulation measurement

Catalogo del Producto

•  Cable and antenna analyzer from 25 MHz to 4 GHz
•  Measures of VSWR, DTF, cable Loss and phase S11
•  Option: Power meter

Product

•  Cable and antenna analyzer from 100 MHz to 2,7 GHz
•  Measures of VSWR, DTF, cable Loss and phase S11
•  Option: Power meter

Product

•  Cable and antenna analyzer from 25 MHz to 4 GHz
•  Measures of VSWR, DTF, cable Loss.
•  Option: Power meter

Product

• From 9 KHz a 13 GHz.
• Option 09 : Demodulation Hardware
• Opcion 541: Measures RF LTE
• Opcion 542: Measures demodulation LTE
• Opcion 543: Measures demodulation LTE 15 & 20 MHz

Information about Product

Included

•  22N50 : Open/Short
•  SM/PL: Precision Load
• Options:XX UM70, XXUM100, XXUM120 & XXUM140 Waveguide Calibration Kits

Product

• From 9 KHz a 20 GHz.
• RBW 1 Hz

Information about Product

High quality 4 channel DSO with 70 MHz bandwidth + 2 channel waveform generator with 25 MHz bandwidth, 1 GSa/s and 12 Mpts memory depth. Delivery including 4 probes (bandwidth 150 MHz), USB cable, power adapter and manual on CD.

Dowload   DATASHEET   USER MANUAL

High quality 4 channel DSO with 100 MHz bandwidth + 2 channel waveform generator with 25 MHz bandwidth, 1 GSa/s and 12 Mpts memory depth. Delivery including 4 probes (bandwidth 150 MHz), USB cable, power adapter and manual on CD.

Dowload   DATASHEET   USER MANUAL

• From 9 KHz a 20 GHz.
• RBW 1 Hz

Information about Product

• Built-in spectrum analyzer (100 kHz to 7.1 GHz)
• Built-in cable and antenna analyzer (10 MHz to 4 GHz)
• Built-in power meter (10 MHz to 7.1 GHz)
• GPS Receiver and bias tee

Catalogo del Producto

AD456 is an optical fiber splicing device with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. The built-in large capacity Li-Ion battery can support long-time field work. The real-time compensation system for temperature, and air pressure has greatly enhanced the device against unfavorable environment changes.

Main Features:
    ο New fully-digitalized design;
    ο Small in size, lightweight: only 1,9 kg with battery;
    ο Takes only 7 seconds for splicing, 18 seconds for pyrocondensation;
    ο Can set automatic start of splicing or of pyrocondensation upon close of the cover;
    ο Simultaneous display of X/Y axis; zoom in up to 320 times original size;
    ο Real time discharging for adjustment; no need for further adjustment;
    ο Electrode has a long life; discharging times up to 4000;
    ο With USB port;
    ο 4,3 inch digital high resolution LCD;
    ο Precise real-time display of remaining battery capacity;
    ο Built-in high capacity battery, which enables up to 220 times of splicing and heating.

Information about Product

Included

• Analizador de cable y antenas de 2 MHZ a 4GHz.
• Incluido 1 calibrador y 1 cable de medida
•  Opcional: ICN50: InstaCal Calibration Module, 2 MHz to 6.0 GHz, N(m), 50 Ω

Product

•  Cable and antenna analyzer from 25 MHz to 4 GHz
•  Two ports
•  Option: Power meter

Product

• From 9 KHz a 4 GHz.
• RBW 1 Hz

Information about Product

AD456 is an optical fiber splicing device with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. The built-in large capacity Li-Ion battery can support long-time field work. The real-time compensation system for temperature, and air pressure has greatly enhanced the device against unfavorable environment changes.

Main Features:
    ο New fully-digitalized design;
    ο Small in size, lightweight: only 1,9 kg with battery;
    ο Takes only 7 seconds for splicing, 18 seconds for pyrocondensation;
    ο Can set automatic start of splicing or of pyrocondensation upon close of the cover;
    ο Simultaneous display of X/Y axis; zoom in up to 320 times original size;
    ο Real time discharging for adjustment; no need for further adjustment;
    ο Electrode has a long life; discharging times up to 4000;
    ο With USB port;
    ο 4,3 inch digital high resolution LCD;
    ο Precise real-time display of remaining battery capacity;
    ο Built-in high capacity battery, which enables up to 220 times of splicing and heating.

Information about Product

AD454 is an optical fiber splicing device with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. The built-in large capacity Li-Ion battery can support long-time field work. The real-time compensation system for temperature, and air pressure has greatly enhanced the device against unfavorable environment changes.

Main Features:
    ο New fully-digitalized design;
    ο Small in size, lightweight: only 1,5 kg with battery;
    ο Takes only 10 seconds for splicing, 36 seconds for pyrocondensation;
    ο Can set automatic start of splicing or of pyrocondensation upon close of the cover;
    ο Simultaneous display of X/Y axis; zoom in up to 320 times original size;
    ο Real time discharging for adjustment; no need for further adjustment;
    ο Electrode has a long life; discharging times up to 5000;
    ο With USB port;
    ο 4,3 inch digital high resolution LCD;
    ο Precise real-time display of remaining battery capacity;
    ο Built-in high capacity battery, which enables up to 250 times of splicing and heating.

Information about Product

• Built-in spectrum analyzer (100 kHz to 7.1 GHz)
• Built-in cable and antenna analyzer (10 MHz to 4 GHz)
• Built-in power meter (10 MHz to 7.1 GHz)
• GPS Receiver and bias tee

Catalogo del Producto

Sets REBT-1  CAT. Basic: formed by:

• AD233: Analyzer of networks and harmonic, it includes 1000A clamps, connection USB and software for PC.
•  AD4120: Ground Meter
•  AD9985: Isolate Meter analogical / digital 1000V/10 Gohm.
•  AD2811: Digital loop impedance meter
•  AD4112: Digital RCD meter.
•  AD1010: Luxómeter
•  LVD-17: Tension detector with ajsute of sensibility.
•  AD3348: Clamp wattmeter AC/DC TRUE RMS
• AD9809: High resolution 1 uA AC leakage clamp meter

• From 9 KHz a 20 GHz.
• Option 25 : Interference analyzer
• Option 31: GPS receiver

Information about Product